Network Booster

Network Booster

Cell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save somebody’s life.
Unfortunately, there are still some places where you may find “out of coverage”. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: Conjusted Ground Floor, Basement Parking lots, tunnels, Big Shopping Malls, office buildings or House in remote areas etc.

How the Repeater Works?
•The outdoor antenna catches the signals from the mobile base station and carry forward to the Repeater Device through the Co-axial cable
•Repeater Device Boost-up the signals.
•Then this amplified signal goes through the Co-axial cable to the indoor Ceiling antenna
•And after that, the amplified signal transmits to the cell phone.

Features:
Support all GSM and 3G operator signals
High linear design, ALC function
Provide quick coverage solution for weak signal and blind area
No more drop calls or distorting sounds
Support 8 indoor Antenna (max.)
Cover about 1000sqm without barrier

Repeater Specifications:
GSM frequency range: uplink- 890-915MHz, downlink- 935-960MHz
WCDMA frequency range: uplink- 1920-1980MHz, downlink- 2110-2170MHz
Booster type: GSM & 3G/WCDMA dual band signal booster
output power: 20dbm
Gain: 65db
Power supply: AC:100-240V, 50/60Hz ; DC: 12V,2A
power comsumption: 40W max.
VSWR: < 1.8
Impedance: 50 ohoms
Connector: N Type female
MTBF: More than 50000 hours
Max. Coverage: 1000 sq meter (by 8 indoor Antenna)
Dimensions(D*W*H): 200*110*25 (mm)

Outdoor Antenna Specifications:
Frequency: 806-960MHz / 1710-2500MHz
Type: Outdoor, Log Periodic Dipole, Pole/wall Mount
Gain: 9dBi @806-960MHz, 11dBi @1710-2500MHz
VSWR: ≤1.4
Max power: 100W
Impedance: 50Ω
Polarization: Vertical
Horizontal Beam width: 65°
Vertical Beam width: 55°
Front to Back Ratio: ≥18dB
Lightning Protection: DC Ground
Weight: 0.87kg
Color: white
Dimension: 293×210×65mm
Connector Type: N-Female
Radiating Element Material: copper
Radome Material: UV-Resistance ABS

Indoor Antenna Specifications:
Frequency range: 806-960MHz / 1710-2500MHz
Type: Indoor, Omni directional, Ceiling Mount
Gain: ≥2dBi @806-960MHz / ≥4.7dBi @1710-2500MHz
VSWR: ≤1.5
Polarization: vertical
AZ/EL BW: 43/88°
Input impedance: 50ohms
F/B ratio: ≥13dB
Maximum power: 50W
Connector Type: N-Female
Lighting protection: DC ground

Installation Steps:
1. Fix up the outdoor antenna on housetop or some other high place and aim to desired signal tower
2. Connect outdoor antena to the repeater”BTS” port via Co-axial cable
3. Setup Indoor Ceiling Mount Antenna near cell phone using area
4. Conncet indoor antenna to the repeater “MOBILE” port via Co-axial cable
5. Plug the AC power Adapter into power source and finished

Troubleshooting:
1. If still weak signal receive after installation, please check if outdoor antenna point to signal tower correctly or elsewhere has stronger signal and confirm signal strength achieve minimum -70dBm
2. If strength is not steady, please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line
3. Cover the “BTS” port connector by Insulating Tape, otherwise wet reduce the signal cover area

Package Included:
1 x GSM/3G Signal Booster Repeater
1 x Power Adapter
1 x Log Periodic Dipole Outdoor Antenna
1 x Indoor Omni directional Ceiling Antenna

Cables and installation costs are not included with this Basic Combo Package.